All times are UTC


It is currently Sat Nov 30, 2024 5:14 pm



Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 3:12 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
I have a question to any and all avid terrain builders. 8)

I finally started painting my 4' x 4' board today by washing the entire board with black and then doing splotches of green wash with a brown wash to blend that in and cover any bare spaces. Of course, I left black showing as much as possible for shadowing and so far I think the board looks great. I could try taking a picture of it but the sun is already down and I'm not sure you'll be able to see anything.

Image

Image

I think the colors are more visible in the second picture. But then again... Also the board is darker than what is in the pictures.

The next step I believe is to start drybrushing it. Right? My question would be, what colors should I use to highlight it with? how much and where? and most important, how do I highlight it without getting lines from the brush strokes?

I hope you guys can help in any way. I think I'll post this same question in the terrain help forum as well. Thanks in advance!! :-D

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 7:30 am 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Yep. When i painted my board i treated it just like a mini. Started with a base coat, put on a wash then dry brushed on the highlights.
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 8:14 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Any specific colors I should use on the board?

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 8:41 am 
Craftsman
Craftsman
Offline

Joined: Fri May 29, 2009 11:16 pm
Posts: 368
Location: New York, USA
It would be helpful if you told us what type of terrain you are attempting to portray. A summer meadow? A winter Frost thing? Mordor? What?

I can help you but I need to know what the end results needs to look like.
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 9:16 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Nevinsrip wrote:
It would be helpful if you told us what type of terrain you are attempting to portray. A summer meadow? A winter Frost thing? Mordor? What?

I can help you but I need to know what the end results needs to look like.

Oh yes. That would be very helpful. Sorry about that. :oops:

I'm looking to create a mix between grasslands and the underbrush like you see at Amon Hen.

Pictures of what I'm looking for might help better. :)

This first one is what I'm looking for, that is with the amount of grass there is but with the dirt showing in places. The second one however, shows the type of battlefield that I'm going to try and convey. I also really want to incorporate the scattered rocky outcrops that you can see in the second image.

Image

Image

I hope that gives you a clearer view of what is in my head. ;)

And here is a link to more pictures of the second image: http://www.dchobbitleague.com/grassy-fields.html

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 9:41 pm 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Browns, greens, yellows. That is what I see.
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Fri Nov 27, 2015 9:47 pm 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Awesome, thanks! I'll get started on that then. For the grass, would I use flock, static grass, or a mixture of them?

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sat Nov 28, 2015 5:04 am 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Use flock and static grass for patches of tall grass, but for the most part, use flock.
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sat Nov 28, 2015 9:10 am 
Craftsman
Craftsman
Offline

Joined: Fri May 29, 2009 11:16 pm
Posts: 368
Location: New York, USA
Before you do anything else, carve out your river and place your bark chips where you want your ridges to go. You can terrain around the ridges for now, but the river bed has to go in now. Again you don't need to work on the river yet, just cut it out.

Now...groundwork. Everything else relies on it.

You should try mixing some sand into a couple of dark brown paints, like Chocolate Cherry, Bittersweet Chocolate and so on, using those cheap 2 ounce craft paints like Folkart or CeramCoat. The sand will stick to the panel and break up the surface. It will also harden, protecting your board. Regular sand from the beach or playground is fine. Mix a shot glass full into the 2 ounce craft paint. I use a plastic six ounce drinking cup to mix it in.
Add in a 50 - 50 mix of white glue and hot water and mix it up till it's all one color.
Slop it all over your board with a large brush.
You can mix in a different color browns into the original mixture to vary the colors.
You should end up with a nice sturdy board with a good base to work on.

Let this dry overnight. Two, if your not in a hurry.

After that I drybrush a color called Ochre over the whole surface. This is a yellow with some brownish tint to it. It lightens the chocolate colors nicely.
Next, I do a second drybrush using Folkart Sand color. I run this over the high points and it serves to pick out the "rocks" quite well.
Check out what the bare earth will look like here.
viewtopic.php?f=7&t=31503

Let this dry and we can move onto flocking using various turfs, static grasses and clump foliages.

But first, let's see how this works out.

You should check out my terrain pieces here on this board to see examples.
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sat Nov 28, 2015 9:32 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
Nice project.

Everyone does things differently. There is no wrong way.I am going to just give tips.

I like to use a sponge.

Image

Dark to light I use a custom dark gray green,burnt umber,pewter gray and teddy bear tan and ivory.

Image

I use drywall filler for texture and use the dark gray green paint while the filler is still wet.

Image

Image

This will need to dry overnight

Image

I left this for week but overnight would have been ok.

Image

I add details and complete most of the texture and pain before I add flock

Image

Build your texture in stages.

Image

Image

Image

The trees are not attached.

I make my own flocking. The brown texture is ground floral moss and lichen.Use as many textures as possible.

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Mon Nov 30, 2015 1:21 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Thank you everyone for your help and advice! :D I am done with the painting part, though I may do another highlight and more shading on spots that got too much highlight. I'll start adding the flock and static grass when I get the time, however, I'm back at university and won't be going home for a while. (Thanksgiving break is over). The semester is almost over, so maybe I'll get it done towards the end of December after finals. Thanks again!

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sun Dec 13, 2015 6:08 pm 
Kinsman
Kinsman
User avatar
Offline

Joined: Mon Feb 09, 2004 2:20 pm
Posts: 81
Location: Gillingham, Kent
Over on my site in the Building Middle Earth - General Section there are a couple of articles that may be of some small help:

Simple Gaming Boards
Modular Terrain - Basic Tiles
Modular Terrain - Mountains and Rivers

Also a member wrote a Journal Entry which can be found in the same section called Modelling Games Workshop’s Battleboards to be more like Middle Earth. This is a great read with some painting tips that could be of use.

_________________
http://www.talesofmiddleearth.co.uk
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sun Dec 20, 2015 6:42 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Mithaearon wrote:
Over on my site in the Building Middle Earth - General Section there are a couple of articles that may be of some small help:

Thanks Mithaearon! The site helped a lot!

I've started to apply the first layer of flock, but the board was still drying when I took these photos. It won't be that green. There will be spots that are bare of grass. I still need to add different layers and shades to it.

Image

Image

This hill has more layers on it, but it still needs more diversity. (I decided to do the hill at the same time as the board.)

Image


Thanks to everyone for the help! It looks more green than what I imagined but it will work. :) More to follow!

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Sun Dec 20, 2015 11:26 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Mon Feb 09, 2004 2:20 pm
Posts: 81
Location: Gillingham, Kent
Looking good. Yeah my boards always start really green but I add various flocks over this to diffuse the green.

_________________
http://www.talesofmiddleearth.co.uk
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Thu Jun 02, 2016 6:47 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
Is it finished?
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Thu Jun 02, 2016 6:57 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
MacCollac wrote:
Is it finished?

I wish it was. :( Unfortunately, I got busy after I started it and then I started working two jobs and then went back to college and haven't been back home to work on it.
I'll finish this semester in July and will have a 7 week break before the next one, but my brother is getting married in August, so I will most likely be busy helping with all that stuff, then I'm off to college again. I probably won't get to work on it till winter, :shock: which is when I started the project! I guess we'll all be surprised if I get it done before then. :-D

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
 Post subject: Re: To Paint a Gaming Board
PostPosted: Thu Jul 28, 2016 2:03 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Mon Mar 07, 2011 4:55 am
Posts: 1089
Location: That one place... in that one city....
Images: 10
Surprise!! :D I got it finished!!! :D

And it didn't take as long as I thought it would to finish the board. :-D

I basically soaked the whole thing in watered down PVA glue, though I was thinking of giving it a second spray to help solidify the bigger clump foliage that is scattered around. Thoughts?

(Also, the lighter and darker spots are from the sun shining on it and the shade from the trees. It doesn't have that stark of contrast between colors.)

And here it is! Not as green as before. :rofl:

Image

Image

Image

Image

Image

Image

Image

It's such a joy to finally have a project complete!! :D Now to get an army or two done to fight on it....

_________________
My WIP page: Click Here! -->So It Begins

Current Project: Ringwraiths - Haradrim - Mumakil
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: