All times are UTC


It is currently Wed Nov 27, 2024 10:39 pm



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: What is the best material for the base/bottom of terrain?
PostPosted: Mon Dec 07, 2015 6:18 am 
Loremaster
Loremaster
User avatar
Offline

Joined: Fri Oct 04, 2013 6:28 am
Posts: 2446
Location: Chicago
For example....making a small section of things or a patch of tree line etc.....

I used materials before but once glued the flat part would bend. Or, I would have squared edges and thick ones that don't sit flush with the table. Any help?

_________________
BLACKHAWK 2010 2013 2015 DYNASTY
Top
  Profile  
Reply with quote  
 Post subject: Re: What is the best material for the base/bottom of terrain
PostPosted: Mon Dec 07, 2015 8:19 am 
Craftsman
Craftsman
Offline

Joined: Fri May 29, 2009 11:16 pm
Posts: 368
Location: New York, USA
Got to Home Depot and buy a sheet of 1/8 inch MDF. You can get a small 2 x 2 foot piece to start with. It comes in full 4 x 8 sheets, but you should wait until you're comfortable working with it before buying a big sheet.

You gonna need 2 power tools. A jigsaw with a fine blade and a hand held sander with medium grit sandpaper. If you're serious about terrain, you cannot live without these tools. If finances are tight, try a second hand store or flea market. Shouldn't cost you more than 25 bucks for both.

OK, now hook up your tools OUTSIDE.
The MDF has a glossy side and a rough side.
Cut with the rough side down.

Draw some shapes on you MDF sheet with a black magic marker. Start simple. Draw an amoeba shape that will fit 2 or 3 trees on it. Now put on eye, ear and nose protection, and cut the shape out with the jigsaw.

Unplug the jigsaw.

Plug the sander in and proceed to sand the edges all around. Keep sanding until the edges are paper thin everywhere. This will take you all of 3 or 4 minutes. Be warned however, that dust will be everywhere. Which is why I said OUTSIDE, lest you better half take the jigsaw to you!!
Seriously, be prepared for a dust storm.

Once finished, you now have a perfect base for whatever you need to display
Two more things.
Use the rough side up. Things will attach better to the rougher side.
Second, rough up the glossy side with a rasp, file or just crisscross some razor blade cuts.
Just enough to break the tension.

Now spray paint it with any leftover spray paint you have lying around. This will tighten and seal the MDF and keep it from warping on you,
once you begin to glue things to the opposite side.

Take a look at some of the terrain pieces that I've posted here. You'll see
the end results.
Remember the WalMart black spray paint advice. LOL LOL.
In other news:
Kane on a tear...Isles 5-0-2 in last 7 games
Top
  Profile  
Reply with quote  
 Post subject: Re: What is the best material for the base/bottom of terrain
PostPosted: Wed Dec 09, 2015 3:38 am 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
Well said Nevinsrip I can not add a thing 8)

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
 Post subject: Re: What is the best material for the base/bottom of terrain
PostPosted: Sun Dec 13, 2015 5:47 pm 
Kinsman
Kinsman
User avatar
Offline

Joined: Mon Feb 09, 2004 2:20 pm
Posts: 81
Location: Gillingham, Kent
I wrote an article on basing options for terrain: Basing Options may be of some help.

_________________
http://www.talesofmiddleearth.co.uk
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: