The One Ring http://gbain.powweb.com/ |
|
High Elf Spears http://gbain.powweb.com/viewtopic.php?f=30&t=27996 |
Page 1 of 1 |
Author: | abcdefg [ Sat Feb 22, 2014 10:50 pm ] |
Post subject: | High Elf Spears |
Okay, so. High Elf Spearmen are too expensive. High Elf Swordsmen are not. I have spare shields from the cavalry kit. The only thing I'm missing is the spears themselves. Where can I find alternatives? I don't mind if they aren't the High Elf style as long as they look suitably ornate/ aren't the boring dark ages style. Any ideas? |
Author: | GothmogtheWerewolf [ Sat Feb 22, 2014 10:53 pm ] |
Post subject: | Re: High Elf Spears |
make spear out of metal rods, and put a blob of green-stuff at the top in a spear tip shape. |
Author: | Gwaryan [ Sat Feb 22, 2014 11:09 pm ] |
Post subject: | Re: High Elf Spears |
You get some spare lances with the knights of rivendell set that should work. Have you thought about using them? |
Author: | abcdefg [ Sat Feb 22, 2014 11:15 pm ] |
Post subject: | Re: High Elf Spears |
Unfortunately I got my Knights from Ebay without any of the extras. I've just been looking at the sprues online and I think that is the best idea. So, the question is: Does anyone have that they don't want or know where to get hold of spare spears (with or without arms/hands) (and also the shields) from the Rivendell Knights kit? The banner would be great too, but thats an extra. |
Author: | Coenus Scaldingus [ Sat Feb 22, 2014 11:16 pm ] |
Post subject: | Re: High Elf Spears |
Currently trying to copy the spear tips with instand mold to use on some Noldorin Exiles (otherwise made from normal plastic Wood Elves) - haven't used the stuff before though, so not sure how the results will be, but in theory it should work. And in practice too, eventually. A two-part mold isn't the easiest thing to start with, however. |
Author: | ScarpeIron [ Sun Feb 23, 2014 8:28 am ] |
Post subject: | Re: High Elf Spears |
Clip the sword blade off. Drill a hole in the base and attach it to paper clip. There is the spear. Take the hilt and carefully secure it in the folds of the cloak, to make it look like the scabbard is beneath it. Readjust the left arm down to hold the shield and drill a hole through the right hand to hold the spear. -Scar |
Author: | abcdefg [ Sun Feb 23, 2014 8:47 am ] |
Post subject: | Re: High Elf Spears |
What're you using to drill into the sword blades? A pin vice? GothmogtheWerewolf wrote: make spear out of metal rods, and put a blob of green-stuff at the top in a spear tip shape. Ive never had much luck with this, but that may simply be due to a lack of experience with greenstuff. |
Author: | ScarpeIron [ Sun Feb 23, 2014 9:57 am ] |
Post subject: | Re: High Elf Spears |
The hobby drill from gw. |
Author: | ScarpeIron [ Sun Feb 23, 2014 10:00 am ] |
Post subject: | Re: High Elf Spears |
viewtopic.php?f=50&t=21927 It is a link to how it looks, and a brief before and after photo. Should be toward the bottom of he 1st page. |
Author: | abcdefg [ Mon Feb 24, 2014 7:49 pm ] |
Post subject: | Re: High Elf Spears |
That looks good! I may try it. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |